Hey everyone, I’m Jake, and for the last 8 years, I’ve been selling amorphous cores to companies that build transformers, inductors, and all kinds of power gear. I get a lot of questions from new folks in the industry: “Wait, why should I swap my standard silicon steel cores for amorphous ones? Isn’t just a tiny material tweak?” Let me cut through the industry jargon here—no stuffy technical papers, just the real stuff I see every day that makes amorphous cores the secret weapon for way better energy efficiency. Amorphous Core

First, let’s keep this super basic. Most power devices you see—like the transformers on utility poles, the ones inside your laptop charger, or even big industrial inductors that run factories—use cores made of silicon steel. That’s been the go-to for decades, right? But here’s the thing: every time that core gets hit with an alternating current (which, let’s be real, is how almost all our power is delivered), it heats up a little. That heat isn’t doing any work—it’s wasted energy. We call that “core loss,” and it’s a huge drag on efficiency. I’ve had customers tell me they were losing 2-3% of their entire facility’s electricity just to core loss. For a 100,000 sq ft warehouse or a mid-sized factory, that’s tens of thousands of dollars a year down the drain.
Now, amorphous cores are different. Instead of heating the metal in a furnace for hours and cooling it slowly to get a crystal structure (that’s silicon steel), we make amorphous metal by melting iron, boron, and a couple other tiny elements, then spitting it out at lightning speed—like a million degrees per second. That’s so fast the metal atoms don’t have time to line up into neat crystals. They’re all jumbled, like a frozen mess of glass. That “amorphous” structure is the game-changer when it comes to core loss. I’ve tested this myself: for the same size core, amorphous has like 80% less core loss than standard silicon steel. No exaggeration, that’s not a sales pitch—that’s the data from every lab I work with.
Wait, let’s make this relatable. Let’s say you run a small business that makes HVAC systems. Your transformers are supposed to turn high-voltage grid power into the low-voltage stuff your machines use. With a silicon steel core, 2 out of every 100 units of power you send into the transformer just gets burned off as heat. With an amorphous core? Only 0.4 units are wasted. Over a year, that adds up to thousands in lower utility bills, plus you’re not contributing as much to carbon emissions—something a lot of small business owners are starting to care about, both for their customers and for tax breaks these days.
Another big win? Amorphous cores are way lighter and smaller than silicon steel cores for the same power output. I had a customer a couple years back who builds portable solar inverters. They were using a heavy 15-pound silicon steel core that made their whole unit too bulky to carry up ladders for rooftop installs. Swapping to amorphous cut the core weight to 5 pounds, and even improved efficiency by another 5%. Suddenly their product was way easier to sell, and their customers paid a 10% premium for the portability. That’s not just saving energy—that’s opening up new markets.
But let’s talk about the real stuff that makes me go “this isn’t just a fad.” Utility companies have been switching to amorphous cores left and right the last 10 years, and it’s not because they feel like it. The Department of Energy in the US did a study a few years back that said if all distribution transformers in the US used amorphous cores, they’d save enough electricity every year to power the entire country of Denmark. That’s wild. I’ve worked with a big municipal utility out of Texas that switched 90% of their transformer fleet to amorphous cores in 2021. They told me their energy costs from transformer losses dropped by $1.2 million that first year. No new equipment, no big overhead—just swapping the core. That’s the kind of result that makes you go, why hasn’t everyone done this sooner?
Wait, I know what some of you are thinking: “Amorphous cores must be super expensive, right?” Yeah, a few years back they were, because production was limited. But now that we’ve scaled up the process—no fancy tricks, just better manufacturing lines and faster production runs—they’re only about 10-15% more expensive than good silicon steel. And let’s do the math: that $1.2 million a year in savings? You pay back that 15% extra cost in like 2 years, then you’re basically making free energy for the rest of the core’s lifespan, which is like 20-25 years. I had a customer who runs a fleet of 200 transformers. Swapping all their cores cost them an extra $80,000 upfront. In year 3, they saved $120,000 in energy costs. That’s a no-brainer. Most of the pushback I hear from people is just old info—they think amorphous cores are still a luxury, but they’re not anymore.
Another thing I don’t see talked about enough: amorphous cores handle high-frequency power way better than silicon steel. That’s huge for everything from EV chargers to data center power supplies. Data centers run on millions of servers, all of which need power converted multiple times a day. If their inductors use silicon steel, that heat adds up—servers overheat, you spend more on cooling, and some of those heat losses are from the power conversion itself. I worked with a data center in Virginia last year that had a problem with their cooling bills being way too high. Swapping the inductors’ silicon steel cores to amorphous cut their inductor heat by 75%, which lowered their cooling load by 10%. That was another $500k a year in savings, on top of the power they weren’t wasting. For EV chargers, which run at super high frequencies to charge cars fast, amorphous cores mean less loss, faster charging, and less energy thrown away as heat. That’s exactly why a bunch of big EV charger manufacturers have switched to us the last 2 years.
Let me also bust a myth here: amorphous cores aren’t just for big industrial stuff. I sell them for small consumer products too—like phone chargers, portable power banks, even smart home devices. A lot of people don’t realize that the tiny core in a 20W phone charger wastes power too. Those chargers plug in 24/7, even when your phone isn’t charging. With a silicon steel core, that standby loss adds up to a couple watts a day. With an amorphous core, it’s like 0.2 watts. Multiply that by millions of chargers, and that’s a lot of saved power every year. I’ve had a small consumer electronics company come to me last year because their chargers were getting bashed for “wasting too much energy” in product reviews. Swapping to amorphous fixed that, and their customer satisfaction scores went up 12 points. That’s not just energy efficiency—it’s brand loyalty.
Now, let’s be real, this isn’t a perfect product. If you’re making a really low-power device, like a tiny sensor that only runs on a battery, the savings might not be worth the extra cost. And you have to handle them a little differently—they’re a bit more brittle than silicon steel, so you can’t bend them roughly or drop them. But for 90% of the power devices I work with—transformers, inductors, EV chargers, data center gear, industrial motors and drives—amorphous cores are the way to go.
At the end of the day, energy efficiency isn’t just a buzzword for companies anymore. It’s what lowers your bills, makes your products better, and helps you hit whatever environmental goals you have. I’ve been in this game long enough to see a lot of trends come and go, but amorphous cores aren’t a trend. They’re a better material, plain and simple.
![]()
If you’re a design engineer, a procurement manager, or someone who builds power gear and wants to stop wasting energy and money, hit me up to chat. No sales pitches, no confusing spreadsheets—just real info on how amorphous cores can help your bottom line and your energy goals.
Amorphous Core References
- U.S. Department of Energy, “Amorphous and Nanocrystalline Alloys for Energy Efficiency Applications,” 2019
- Journal of Power Electronics, “Core Loss Comparison Between Silicon Steel and Amorphous Metal Cores for Medium-Frequency Transformers,” 2022
- Electric Power Research Institute, “Distribution Transformer Efficiency: Amorphous Core vs. Silicon Steel,” 2021
- International Energy Agency, “Global Power Transformers Market: Efficiency Trends,” 2023
Teeyo Technology Co., Ltd.
Teeyo Technology Co., Ltd. is one of the most professional amorphous core manufacturers and suppliers in China. Our factory produces high quality soft magnetic products with high permeability, low core loss and low remanence. Please feel free to buy customized amorphous core at competitive price from us.
Address: No.5 Nanshui Road,Hegui Industrial Estate,Heshun Lishui Town,Nanhai District, Foshan City, Guangdong Province, China.
E-mail: Justin.lzeng@teeyo.net
WebSite: https://www.teeyocore.com/