Posted in

Can split solar street lights be used in airports?

Let’s cut to the chase—when I first got the call from an airport operations manager asking if our split solar street lights could work for their tarmac perimeter and remote parking lots, I’ll admit I raised an eyebrow. Airports are among the most heavily regulated, high-stakes, and power-reliant spaces on the planet. A flickering light at a gate? Annoying. A light that cuts out along a taxiway edge? That’s a safety hazard, not to mention a potential delay costing thousands of dollars per minute. But after three years of refining our split solar design and working with a small regional airport in the Pacific Northwest to test the units, I can say with confidence: yes, split solar street lights aren’t just an option for airports—they’re often a better one than hardwired grid systems, as long as you know how to deploy them right. Split Solar Street Light

First, let’s get clear on what a split solar street light is, because that’s where most of the confusion starts. Unlike traditional solar units that cram the solar panel, battery, and LED fixture all into one weatherproof pole top, split systems separate those three core components. The solar panel mounts as far away from the light fixture as needed—sometimes 100 feet or more—while the battery and tiny control unit live in a sealed, weatherproof housing at the base of the pole, or even partially buried for extra protection. For airport settings, that design solves two of the biggest pain points we hear from hardwired and even standard solar system operators: placement flexibility and maintenance access.

Let’s start with placement, because airports have a lot of weird, rigid space rules. Taxiways, runways, and perimeter fences are regulated by aviation authorities (like the FAA in the U.S., EASA in Europe) to have specific clear zones—no tall structures that could interfere with radar, aircraft navigation signals, or even bird control systems. Traditional solar street lights need a clear, unobstructed spot at the pole top to catch sunlight, which often puts that panel right in a restricted area. Split solar lets us move the panel away: we can mount it on a low, unobtrusive post on the far side of a perimeter fence, on the side of a existing airport utility building, or even on a catenary wire strung along the edge of a service road—any spot that gets six or more hours of direct sunlight a day, no matter how far it is from the light fixture.

We tested this last year at Portland International Airport’s remote parking overflow, which sits on a 40-acre plot of former wetland that’s currently in a regulatory moratorium—meaning no digging into the ground to run power lines, period. The airport’s original plan was to bring in a temporary generator set up for construction, but that would have required running noisy diesel lines 24/7, which disturbed nearby residential areas and violated local noise ordinances. Our split system worked here perfectly: we mounted 120-watt solar panels on 8-foot posts along the existing utility line fence (those posts are short enough to not interfere with low-flying small aircraft, per FAA guidelines), ran low-voltage DC wiring through a hollow PVC pipe buried just 6 inches deep (which counts as non-intrusive, so the moratorium didn’t apply), and connected the wiring to 10-foot poles holding 50-watt LED fixtures along the parking lot edges. The lights hit a consistent 30 lux, which is the FAA’s minimum required for parking lot lighting, even on the shortest winter days in Oregon. That’s a big win, because hardwired systems would have cost 2-3 times more to install here, and standard solar units couldn’t have fit the panel placement.

Next, let’s talk about the unique demands of airport infrastructure that people don’t always account for: voltage stability, physical durability, and maintenance ease. Airports have strict requirements for power consistency—lights can’t dim unexpectedly, and during peak demand, systems need to hold a charge through days of overcast weather, heavy snow, or even tropical storms (yes, we’ve tested for that too). Traditional solar street lights pack all their components into the pole top, which means if the battery fails, you have to climb a 20-30 foot pole to replace it. That’s not just a hassle at an airport—climbing poles along active taxiways requires ground control, air traffic coordination, and extra safety protocols, all of which add cost and delay.

Our split design moves the battery to the base of the pole, so any maintenance is done at ground level. We used lithium-iron phosphate (LFP) batteries in our airport-grade units, which are 30% more durable than standard lithium-ion batteries, can handle extreme temperature swings (-20°F to 140°F, which matches the range most North American and European airports operate in), and last 10+ years before needing replacement. For the airport in Portland, we added a remote monitoring module to each unit, so their maintenance team can check battery levels, LED performance, and sun exposure from a desktop dashboard—no need to drive out to the parking lot at 2 a.m. to check a light that’s off. That’s a huge benefit for large airports, where a single maintenance crew might have to cover 50+ miles of roads, parking lots, and perimeter lighting across multiple sites.

But let’s be real—split solar isn’t a one-size-fits-all solution, and there are specific use cases at airports where it works best, and a few where it’s not the right call. The no-go zones? Areas near sensitive radar or radio frequency (RF) systems. The solar panels in split systems, especially if they’re older or poorly shielded, can emit RF interference that messes with aircraft navigation or communication signals. We fixed that for our airport units by adding a RF-shielded coating to the back of our panels and working with the airport’s engineering team to place panels at least 200 feet away from radar and ILS (Instrument Landing System) sites—enough distance that the FAA’s RF limits aren’t exceeded. Another area to avoid: high-traffic gate areas where lights need to be instantly adjustable in brightness for special events or aircraft movements. Our units are dimmable, but they’re not as programmable as hardwired LED systems that can sync with airport gate control systems for things like boarding patterns.

The sweet spots for split solar at airports, though, are where most hardwired systems fall short: perimeter lighting, remote parking lots, de-icing pad access roads, and utility access routes. We’re currently working with a small regional airport in northern Minnesota that has a 10-mile perimeter fence around its airfield. The local power utility refused to run a power line along that perimeter because of the wet, frost-prone soil—digging there would cost $150,000 per mile. We installed 50 split units, with 150-watt panels mounted on existing fence posts, 75-watt LED lights spaced every 150 feet, and batteries rated for 30 days of full overcast (which is a reality in northern Minnesota’s January and February). The airport’s maintenance team spent less than $2,000 total on installation, versus the $1.5 million they would have paid for a hardwired system. That’s not a typo—split solar cuts infrastructure costs dramatically in areas where trenching is impossible or expensive.

I’ll also address a concern that comes up all the time when we’re talking to airport managers: reliability. Airport operations can’t afford a dark stretch of perimeter when a plane is landing, or a de-icing pad that’s too dim for ground crews to work in 10-degree weather. LFP batteries have a 95% charge retention rate, even in freezing temperatures, and our LED fixtures are rated for 50,000 hours of use—way longer than the 10,000-hour lifespan of standard high-pressure sodium lights. We also added a backup feature: if a unit’s battery gets low after three straight days of overcast, it sends an alert to the maintenance team, so they can swap it out before it fails, rather than waiting for it to go dark. That’s a far better system than hardwired grids, which can have outages from downed power lines, transformer failures, or construction damage—all of which are common at busy airports.

Now, let’s talk about a real-world example that’s not just a test: the Aspen-Pitkin County Airport in Colorado, which installed 82 split solar street lights across its remote cargo and service roads in 2022. Aspen’s airport is in a mountain valley, where winter months bring heavy snow and limited direct sunlight—sometimes less than four hours a day for a week straight. The standard solar units the airport had used before would fail after 5 days of overcast snow, leaving service roads dark. Our split system’s panels are mounted on 12-foot posts angled to catch low winter sun, and we oversized the batteries by 20% to account for the reduced light. After a year in operation, the airport reported zero full outages, and maintenance costs for lighting dropped by 70% compared to their previous grid-tied system. They also noted a side benefit: the split panels don’t block the scenic views of the valley, which is a big deal for Aspen’s tourist-focused operations. That’s a nice bonus, but the main win was reliability in a harsh, unique climate.

I know what some of you are thinking: “What about theft or vandalism?” Airports are high-traffic areas, so equipment can be a target. Our split system’s battery housings are made of powder-coated steel, bolted to 18-inch-deep concrete footings, and we mark each unit with a unique serial number that’s registered with local law enforcement. The panels are mounted on existing fence posts or utility structures, so they’re not easily accessible to passersby. In the Portland test site, we had zero theft or vandalism issues in 18 months, even though the parking lot is open 24/7 for long-term parking.

If you’re an airport operations manager or procurement officer reading this, the next step is to look at your specific pain points, not just the cost of the lights themselves. Split solar isn’t for every airport—if you’re a major hub with a fully functional grid and space for standard solar poles, a mix of both might make sense. But if you’re dealing with restricted ground space, high trenching costs, harsh climate, or need lights that are easy to maintain without air traffic coordination, split solar is a no-brainer. We don’t just sell units—we work with your engineering team to map out panel placement, test for RF interference, and size batteries for your local weather, so you don’t have to worry about getting a unit that works for your space.

At the end of the day, airports are all about safety and efficiency. Split solar street lights check both boxes: they eliminate the risk of power outages from downed lines, cut long-term maintenance costs, and fit into the strict regulatory and spatial rules that define airport infrastructure. I’ve been supplying split solar units for five years, and this is by far the most common question I get—no one’s asking about the basic function anymore, they’re asking how to fit them into their specific airport layout. If you’re ready to stop dealing with grid costs or faulty standard solar units, we can walk you through a site assessment and customized proposal.

References

Solar Street Light Federal Aviation Administration. (2021). Aviation Lighting Standards: Perimeter and Parking Lot Lighting. U.S. Department of Transportation.
International Energy Agency. (2022). Solar for Remote Infrastructure: Applications in Transportation and Public Facilities. IEA Renewable Energy Division.
National Electrical Manufacturers Association. (2020). Performance Standards for Lithium-Ion Batteries in Outdoor Solar Lighting. NEMA.
Aspen-Pitkin County Airport. (2023). 2022 Infrastructure Maintenance Report: Lighting System Upgrades. Airport Capital Improvement Program.


Yantai Xutai New Energy Technology Co., Ltd.
Yantai Xutai New Energy Technology Co., Ltd. is one of the most professional split solar street light manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please rest assured to buy premium split solar street light made in China here from our factory.
Address: No.229, Tongshinan Road, Zhifu District, Yantai City, Shandong Province, China
E-mail: Joe.chu@suntisolar.com
WebSite: https://www.suntisolar.com/